Structure of shielding box

830 (W) × 608 (H) × 503 (D) mm

With a W-CDMA, CDMA, GSM, PDC, PHS, OBE of ETC, wireless LAN, Bluetooth and wireless communication equipment, it is possible to test the wireless system in a free space that is close to actual working conditions (testing of transmission power, transmission frequency, spurious, occupied bandwidth, carrier-off leakage power, adjacent channel power, modulation factor, transmission eye pattern, etc.).

This wireless system test is done in the state where a test sample is placed on the acrylic resin table (200 mm × 200 mm) in ME8661A as shown above, a receiving antenna is mounted in a position that is opposed to the test sample the output of a receiving antenna is connected to a spectrum analyzer, microwave wattmeter or the like. Therefore, an optional receiving antenna is needed for conducting this test. Two optional receiving antenna models, i.e., Model A and Model B, are available. It is, however, also possible to mount an antenna of different specification, if the frequency band and polarization are appropriately specified. A distance of 30 cm or greater may be provided between the test sample and the receiving antenna.
An optional reference antenna is used for calibration of RF coupling degree (loss between front face of test sample and SMA connector of receiving antenna output). Antenna gain and frequency characteristics data of RF coupling degree are appended to this reference antenna. Although the antenna itself is the same whether a reference antenna or a receiving antenna, a reference antenna is provided with a fixing stand made of acrylic resin, so that it can be placed on the acrylic resin table.

Reference antenna A

Frequency range : 2 to 18GHz
Antenna gain : -2 to +6dBi (with data)
VSWR : less than 2.0
Polarization : Right circular
Max. input power : 1W @ CW
Application : For OBE of ETC
*Receiving antenna model A is
  same specifications as above
 

Reference antenna B

Frequency range : 2 to 5GHz
Antenna gain : +12.5 to 17dBi (with data)
VSWR : 1.4 (typ.), 3.0 (max.)
Polarization : Linear
Max. input power : 200W @ CW
Applications : Cellular phone, PHS
*Receiving antenna model B is
  same specifications as above
 

Connect a signal source to the reference antenna connector and connect a measuring instrument to the receiving antenna connector. Having done this, antenna characteristics data can be acquired.
 

Capable of using as a mere electromagnetic anechoic box without mounting antenna. It is optimum for simple preliminary experiments for EMC testing and when it is wanted to conduct a test shielded from the external magnetic field.